MINUTES OF PLANNING COMMITTEE MEETING OF
THE COUNCIL OF THE CITY OF
RANDWICK

HELD ON TUESDAY, 9TH OCTOBER, 2007 AT 6:35 P.M.

 

 

PRESENT:

 

The Mayor, Cr B. Notley-Smith (East Ward)

 

North Ward                                 -        Crs J. Kenny, P. Tracey & M. Woodsmith

 

South Ward                                -        Cr R. Belleli

 

East Ward                                  -         Crs M. Matson (Deputy Chairperson)

& D. Sullivan

 

West Ward                                 -        Crs B. Hughes, S. Nash (Chairperson) &

J. Procopiadis

 

Central Ward                               -        Crs A. Andrews & T. Seng

 

 

OFFICERS PRESENT:

 

General Manager                                                                          Mr. R. Brownlee.

Director, City Services                                                                  Mr. J. Frangoples.

Director, City Planning                                                                   Ms. S. Truuvert.

Director, Governance & Financial Services                                         Mr. G. Banting.

Manager Development Assessment                                                  Mr. K. Kyriacou.

Manager Administrative Services                                                     Mr. D. Kelly.

Manager Library & Community Services                                             Ms. B. Todes

Media Officer                                                                               Ms. A. Power.

Library Coordinator                                                                       Ms. R. Chan.

 

1.         APOLOGIES/GRANTING OF LEAVE OF ABSENCES.

 

Apologies were received from Crs Daley and White.

 

RESOLVED:  (Mayor, Cr. B. Notley-Smith/Kenny) that the apologies from Crs Daley and White for non-attendance at the Health, Building & Planning Committee Meeting of the Council held on Tuesday, 9th October, 2007 be received & accepted.

 

2.         CONFIRMATION OF THE MINUTES.

 

CONFIRMATION OF THE MINUTES OF THE HEALTH, BUILDING AND PLANNING COMMITTEE MEETING HELD ON TUESDAY, 11TH OCTOBER, 2007.

 

H83      RESOLUTION:  (Belleli/Kenny) that the Minutes of the Meeting of the Health, Building and Planning Committee held on Tuesday, 11th October, 2007 (copies of which were circulated to all Councillors) be and are hereby confirmed as a correct record of the proceedings of that meeting.

 

3.         DECLARATION OF PECUNIARY & NON-PECUNIARY INTERESTS.

 

Nil.

 

4.         ADDRESSING OF COUNCIL BY MEMBERS OF THE PUBLIC.

 

Prior to consideration of the Agenda by the Committee, the following deputations were received in respect of the following matters:

 

Item 6.2

DEVELOPMENT APPLICATION REPORT - 71 CARRINGTON ROAD, CLOVELLY.

 

Objector                  Ms Elizabeth Rodrigues

 

Applicant                  Mr Anthony Conway

 

Item 6.3

DEVELOPMENT APPLICATION REPORT - 8 NOLAN AVENUE, CLOVELLY.

 

Objector                   Ms Carrie Bengston

 

Applicant                  Mr Phillip Thalis on behalf of applicant

 

Item 6.4

DEVELOPMENT APPLICATION REPORT - 10-16A BREAM STREET, COOGEE.

 

Objector                   Mr Peter Woodbury

 

Applicant                  Mr David Roberts

 

 

The meeting was adjourned at 7.04 p.m. and was resumed at 7.23 p.m.

 

5.         URGENT BUSINESS.

 

Nil.

 

6.         DEVELOPMENT APPLICATIONS.

 

6.1      DEVELOPMENT APPLICATION REPORT - 26-34 MALABAR ROAD, 36-40 MALABAR ROAD, 1-5 YAMBA PLACE, 4-10 ELPHINSTONE ROAD, 12-16 ELPHINSTONE ROAD, 2-14 ILUKA PLACE, SOUTH COOGEE.  (DA/480/2007 & PROP026188)

 

H84        RESOLUTION:  (Andrews/Belleli) that Council as the responsible authority grant its development consent under Section 80 and 80A of the Environmental Planning and Assessment Act 1979 (as amended) to Development Application No DA/480/2007 for upgrade of external landscaping, garbage bin bays, entry elements, fencing and clothes courts in existing Department of Housing estate. at 26-34 Malabar Road, 36-40 Malabar Road, 1-5 Yamba Place, 4-10 Elphinstone Road, 12-16 Elphinstone Road, 2-14 Iluka Place, SOUTH COOGEE  NSW  2034 subject to the following conditions:-

 

The following conditions are applied to satisfy the provisions of section 79C of the Environmental Planning and Assessment Act 1979 and to maintain reasonable levels of environmental amenity:

 

1.       The development must be implemented substantially in accordance with the following plans:

 

Plans numbered

Dated

Received by Council

Stage 4 plans:

 

 

la4-0201 rev a02

30.05.07

14 June 2007

la4-0501 rev a05

30.05.07

14 June 2007

la4-0502 rev a02

30.05.07

14 June 2007

la4-8901 rev a04

30.05.07

14 June 2007

la4-8902 rev a04

30.05.07

14 June 2007

la4-8903 rev a03

30.05.07

14 June 2007

la4-8904 rev a04

30.05.07

14 June 2007

Stage 5 plans:

 

 

la5-0201 rev a02

30.05.07

14 June 2007

la5-0501 rev a05

30.05.07

14 June 2007

la5-0502

21.03.07

14 June 2007

la5-8901 rev a04

30.05.07

14 June 2007

la5-8902 rev a04

30.05.07

14 June 2007

la5-8903 rev a04

30.05.07

14 June 2007

la5-8904 rev a04

30.05.07

14 June 2007

la5-8905 rev a04

30.05.07

14 June 2007

Stage 9 plans:

 

 

la9-0201 rev a02

30.05.07

14 June 2007

la9-0501 rev a05

30.05.07

14 June 2007

la9-0502 rev a02

30.05.07

14 June 2007

la9-8901 rev a04

30.05.07

14 June 2007

la9-8902 rev a04

30.05.07

14 June 2007

Stage 10 plans:

 

 

la11-0201 rev a02

30.05.07

14 June 2007

la11-0501 rev a05

30.05.07

14 June 2007

la11-0502 rev a02

30.05.07

14 June 2007

la11-8901 rev a04

30.05.07

14 June 2007

la11-8902 rev a04

30.05.07

14 June 2007

la11-8903 rev a04

30.05.07

14 June 2007

 

 

as amended by plans numbered la 11-0501 rev. no a06, la 9-0501 rev. no a06, la 5-0501 rev. no a06, la 4-0501 rev. no a06, dated 30.07.07 and plans numbered la11-8903 rev. no. a05, la9-8902 rev. no. a05, la5-8905 rev. no. a05, la4-8904 rev. no. a05 dated 30.07.07 and all received by Council on 30 July 2007; “Statement of Environmental Effects” project number 3934.00, dated 30 May 2007, by DEM, and stamped received at Council on 14 June 2007; the application form and on any supporting information received with the application, except as may be amended by the following conditions:

 

2.       The colours, materials and finishes of the external surfaces are to be compatible with the surrounding development to maintain the integrity and amenity of the structures and the streetscape.

 

3.       There must be no encroachment of the structure/s onto any adjoining premises or onto Council’s road reserve, footway or public place, unless permission has been obtained from the owner/s of the adjoining land accordingly.

 

4.       A sign must be erected and maintained in a prominent position on the site, which contains the following details:

 

·                     name, address, contractor licence number and telephone number of the principal contractor, including a telephone number at which the person may be contacted outside working hours;

·                     name, address and telephone number of the Project Manager,

·                     a statement stating that “unauthorised entry to the work site is prohibited

 

5.       The required Long Service Levy payment, under the Building and Construction Industry Long Service Payments Act 1986, is to be forwarded to the Long Service Levy Corporation or the Council, prior to commencement of work, in accordance with Section 109F of the Environmental Planning & Assessment Act 1979

 

At the time of this development consent, Long Service Levy payment is applicable on building work having a value of $25,000 or more, at the rate of 0.35% of the cost of the works.

 

The following group of conditions have been applied to ensure that adequate drainage is provided from the premises and to maintain adequate levels of health and amenity in the locality:

 

6.       External paths and ground surfaces are to be graded and drained away from the building and adjoining premises in such a manner so as not to result in the entry of water into a building, or cause a nuisance or damage to the adjoining premises.

 

The following conditions are applied to ensure that adequate provisions are made for the management of waste from the development:

 

7.       The bin wash areas are to be graded and drained to the sewer to the requirements of Sydney Water.

 

8.       All building, plumbing and drainage work must be carried out in accordance with the requirements of the Sydney Water Corporation.

 

The following conditions are applied to ensure that the development satisfies the provisions of the Environmental Planning and Assessment Act 1979 and Regulations:

 

9.       The requirements and provisions of the Environmental Planning & Assessment Act 1979 and Environmental Planning & Assessment Regulation 2000, must be fully complied with at all times.

 

10.     All new building work must be carried out in accordance with the provisions of the Building Code of Australia (BCA), in accordance with Clause 98 of the Environmental Planning and Assessment Regulation 2000.

 

The following conditions are applied to ensure that the development satisfies relevant standards of construction, and to maintain adequate levels of health, safety and amenity during construction:

 

11.     The demolition, removal, storage, handling and disposal of building products and materials must be carried out in accordance with the relevant requirements of WorkCover NSW, the NSW Department of Environment & Conservation (formerly the Environment Protection Authority) and Randwick City Council policies and conditions, including:

 

·              Occupational Health and Safety Act 2000

·              Occupational Health and Safety (Hazardous Substances) Regulation 2001

·              Occupational Health and Safety (Asbestos Removal Work) Regulation 2001

·              WorkCover NSW Code of Practice for the Safe Removal of Asbestos

·              Australian Standard 2601 (2001) – Demolition of Structures

·              The Protection of the Environment Operations Act 1997 and Protection of the Environment Operations (Waste) Regulation 1996.

·              Relevant Department of Environment & Conservation (DEC) / Environment Protection Authority (EPA) and WorkCover NSW Guidelines.

·              Randwick City Council Asbestos Policy (adopted 13 September 2005)

 

A copy of Council’s Asbestos Policy is available on Council’s web site at www.randwick.nsw.gov.au in the Building & Development section or a copy can be obtained from Council’s Customer Service Centre.

 

12.     All excavations and backfilling associated with the proposed works must be executed safely in accordance with appropriate professional standards and excavations are to be properly guarded and supported to prevent them from being dangerous to life, property or buildings.

 

Retaining walls, shoring or piling must be provided to support land which is excavated in association with the works, to prevent the movement of soil and to support the adjacent land and buildings, if the soil conditions require it.  Adequate provisions are also to be made for drainage.

 

Retaining walls, shoring, or piling must be designed and installed in accordance with appropriate professional standards and the relevant requirements of the Building Code of Australia and Australian Standards.

 

13.     Surface water/stormwater must be drained and discharged to the street gutter or a suitably designed Absorption pit.

 

Absorption pits must be located not less than 3m from any adjoining premises and the stormwater must not be directed or flow onto any adjoining premises or cause a nuisance.

 

Details of any works proposed to be carried out in or on a public road/footway are to be submitted to and approved by Council prior to commencement of works.

 

14.     Except with the written approval of Council’s Manager of Health, Building & Regulatory Services, all building, demolition and associated site works (including site deliveries) must only be carried out between the hours of 7.00am to 5.00pm on Monday to Friday inclusive and between 8.00am to 5.00pm on Saturdays and all building activities are strictly prohibited on Sundays and Public Holidays.

 

In addition, the use of any rock excavation machinery or any mechanical pile drivers or the like, is restricted to the hours of 8.00am to 5.00pm (maximum) on Monday to Friday only, to minimise the noise levels during construction and loss of amenity to nearby residents.

 

15.     Noise and vibration emissions during the construction of the building and associated site works must not result in damage to nearby premises or result in an unreasonable loss of amenity to nearby residents and the relevant provisions of the Protection of the Environment Operations Act 1997 must be satisfied at all times.

 

16.     Public safety and convenience must be maintained at all times during demolition, excavation and construction works.

 

The roadway, footpath and nature strip must be maintained in a good, safe condition and free from any obstructions, materials, soils or debris at all times.  Any damage caused to the road, footway or nature strip must be repaired immediately, to the satisfaction of Council.

 

A Road Opening Permit must be obtained from the Council and other relevant Authorities prior to excavating or opening-up the road or footway for services or the like.

 

17.     Building materials, sand, soil, waste materials or construction equipment must not be placed upon the footpath, roadway or nature strip at any time and the footpath, nature strip and road must be maintained in a clean condition and free from any obstructions, soil and debris at all times.

 

18.     Bulk bins/waste containers must not be located upon the footpath, roadway or nature strip at any time without the prior written approval of the Council, unless the waste container is located upon the road in accordance with the Roads & Traffic Authority Guidelines and Requirements, and the container is exempt from an approval under Development Control Plan for Exempt & Complying Development and Council’s Local Approvals Policy.  Applications to place a waste container in a public place can be made to Council’s Building Services section.

 

19.     During construction stages, sediment laden stormwater run-off shall be controlled using the sediment control measures outlined in the manual for Managing Urban Stormwater – Soils and Construction, published by the NSW Department of Housing.

 

Stockpiles of soil, sand, aggregate or other materials must not be located on any footpath, roadway, nature strip, drainage line or any public place and the stockpiles must be protected with adequate sediment control measures.

 

Building operations such as brick cutting, washing tools or equipment and mixing mortar are not permitted on public footpaths, roadways, nature strips, in any public place or any location which may lead to the discharge of materials into the stormwater drainage system.

 

A warning sign for soil and water management must be displayed in a prominent position on the building site, visible to both the public and site workers.  The sign must be displayed throughout the construction period.  Copies of a suitable warning sign are available at Council’s Customer Service Centre for a nominal fee.

 

20.     Public safety must be maintained at all times and public access to the site and building works, materials and equipment on the site is to be restricted, when work is not in progress or the site is unoccupied.

 

If it is proposed to locate any site fencing, hoardings or amenities upon a footpath or public place, the written consent from Council’s Building Services section must be obtained beforehand and detailed plans are to be submitted to Council for consideration, together with payment of the weekly charge in accordance with Council’s adopted fees and charges.

 

21.     A local approval application must be submitted to and be approved by Council's Building Services section prior to commencing any of the following activities on a footpath, road, nature strip or in any public place:-

 

·              Install or erect any site fencing, hoardings or site structures

·              Operate a crane or hoist goods or materials over a footpath or road

·              Placement of a waste skip (grater than 3m in length) or any container or other article.

 

The following conditions are applied to maintain reasonable levels of environmental amenity and public health safety.

 

22.     The works shall not give rise to environmental pollution or public nuisance or, result in an offence under the Protection of the Environment Operations Act 1997 or NSW Occupational Health & Safety Act (2000) & Regulations (2001).

 

The following conditions are applied to satisfy the relevant pollution control criteria and to maintain reasonable levels of health, safety and amenity to the locality:

 

23.     The use and operation of the premises shall not give rise to an environmental health or public nuisance and there are to be no emissions or discharges from the premises, which will give rise to a public nuisance or result in an offence under the Protection of the Environment Operations Act 1997 and Regulations.

 

The following conditions are applied to provide adequate provisions for access, transport and infrastructure:

 

24.     The applicant must meet the full cost for Council or a Council approved contractor to repair/replace any damaged sections of Council's footpath, kerb & gutter, nature strip etc which are due to building works being carried out at the above site. This includes the removal of cement slurry from Council's footpath and roadway.

 

25.     The applicant shall note that all external work, carried out on Council property, shall be in accordance with Council's Policy for "Vehicular Access and Road and Drainage Works". An application for the cost of the Council civil works is to be submitted to Council at the completion of the internal building works. An application fee shall be payable to Council for the quotation of the required works. The applicant may elect to use his contractor for the required works, subject to Council approval, however a design and supervision fee based on the lowest quotation from Council's nominated contractor will be required to be paid prior to the commencement of any works.

 

The following conditions are applied to provide adequate consideration for service authority assets:

 

26.     The applicant must meet the full cost for telecommunication companies, gas providers, Energy Australia and Sydney Water to adjust/repair/relocate their services as required.  The applicant must make the necessary arrangements with the service authority.

 

The following conditions are applied to provide adequate provisions for landscaping and to maintain reasonable levels of environmental amenity:

 

27.     That part of the naturestrip upon Council's footway which is damaged during the construction of the proposed works shall be excavated to a depth of 150mm, backfilled with topsoil equivalent with 'Organic Garden Mix' as supplied by Australian Native Landscapes, and re-turfed with Kikuyu turf or similar. Such works shall be completed at the applicant’s expense prior to the issue of a final Occupation Certificate.

 

28.     Landscaping at the site shall be installed in accordance with the Landscape Plans and Planting Palettes, drawing numbers la4, la5, la9 & la11-0501 & 0502, project number 3934-00, revisions a05 & a02, dated 30/5/07, 31/05/07 & 21/03/07, 31/05/07 & 30/05/07 and 31/05/07 & 30/05/07 respectively, prior to completion.

 

29.     Approval is granted for the removal of those trees within the site which have been assigned a SULE (Safe Useful Life Expectancy) rating of 2,3 or 4, as detailed in the Tree Report by Treescan Urban Forestry Management, due either to poor health and condition, or in order to accommodate the proposed works as shown.

 

30.     Those trees assigned a SULE rating of 1, 2 or 3, as detailed in the Tree Report by Treescan Urban Forestry Management, and are deemed suitable and practical for retention as part of the proposed works shall be retained and protected in accordance with ‘Tree Protection During Construction’ and ‘Tree Maintenance Post Construction’, as contained on page 4 and 5 of the report respectively.

 

31.     Prior to the physical commencement of any works at the site, a suitably qualified site Arborist shall be engaged to clearly and correctly identify/tag those trees to be retained or removed at the site, as per the tree numbers assigned in the Arborist Report.

 

32.     Permission is granted for the selective pruning of only those branches which need to be pruned in order to avoid either damage/conflict with site machinery or similar during the course of the works, or to improve the form or structure of those existing trees being retained at the site.

 

33.     All pruning must be undertaken by an Arborist who holds a minimum of AQF Level III in Arboriculture, and shall be performed to the requirements of Australian Standard AS 4373-1996 'Pruning of Amenity Trees.’

 

Advisory Conditions

 

The applicant is to advise Council in writing and/or photographs of any signs of existing damage to the Council roadway, footway, or verge prior to the commencement of any building/demolition works.

 

MOTION: (Andrews/Belleli) CARRIED – SEE RESOLUTION.

 

6.2    DEVELOPMENT APPLICATION REPORT - 71 CARRINGTON ROAD, CLOVELLY.  (DA/534/2007 & PROP051370)

 

H85        RESOLUTION:  (Andrews/Belleli) that Council as the responsible authority grant its development consent under Section 80 and 80A of the Environmental Planning and Assessment Act 1979 (as amended) to Development Application No.DA/534/2007 & PROP051370 for alterations and additions to existing dwelling including first floor addition with rear deck, in ground swimming pool to rear, alteration to existing garage, construction of carport to front of dwelling and new fencing at front and rear at 71 Carrington Road, Clovelly subject to the following conditions:-

 

The following conditions are applied to satisfy the provisions of section 79C of the Environmental Planning and Assessment Act 1979 and to maintain reasonable levels of environmental amenity:

 

1.       The development must be implemented substantially in accordance with the plans drawn by Edifice Design Architects and Planners, numbered DA1a to DA7a inclusive, dated May 2007, marked job number 07164 and received by Council on 11 September 2007, the application form and on any supporting information received with the application, except as may be amended by the following conditions and as may be shown in red on the attached plans.

 

2.       The colours, materials and finishes of the external surfaces to the building are to be compatible with the adjacent development to maintain the integrity and amenity of the building and the streetscape.

 

Details of the proposed colours, materials and textures (i.e. a schedule and brochure/s or sample board) are to be submitted to and approved by Council’s Director of Planning & Community Development, in accordance with section 80A (2) of the Environmental Planning and Assessment Act 1979 prior to a construction certificate being issued for the relevant building works.

 

3.       Metal roof sheeting is to be painted or colour bonded to minimise reflection and to be sympathetic and compatible with the building and surrounding environment.

 

4.       There must be no encroachment of the structure/s onto any adjoining premises or onto Council’s road reserve, footway or public place, unless permission has been obtained from the owner/s of the adjoining land accordingly.

 

5.       No cooking facilities or sanitary fittings other than those indicated on the approved plans are to be installed in the premises without the prior written consent of the Council.

 

6.       The south-facing first floor front bathroom window, staircase window, walk-in-robe window and rear bathroom windows are to be provided with translucent, obscured, frosted or sandblasted glazing. Details of compliance are to be provided in the construction certificate plans.

 

7.       A dilapidation report prepared by a professional engineer or suitably qualified and experienced building surveyor shall be submitted to the certifying authority prior to the commencement of demolition, excavation or building works detailing the current condition and status of all buildings, including ancillary structures (i.e. including dwellings, residential flat buildings, commercial/industrial building, garages, carports, verandah’s, fences, retaining walls, swimming pools and driveways etc.) located upon no.73 Carrington Road, Randwick.

 

The report is to be supported with photographic evidence of the status and condition of the buildings and a copy of the report must also be forwarded to the Council and to the owners of the abovestated premises, prior to the commencement of any works.

 

8.       The rainwater tank to the southern side of the site shall be painted or have a similar colour to that of the dwelling at no.71 Carrington Road. Details of compliance are to be provided in the construction certificate plans.

 

The following condition is imposed to satisfy relevant requirements of the Sydney Water Corporation.

 

9.       All building, plumbing and drainage work must be carried out in accordance with the requirements of the Sydney Water Corporation.

 

The approved Construction Certificate plans must be submitted to a Sydney Water Quick Check agent or Customer Centre prior to commencing any building or excavation works, to determine whether the development will affect Sydney Water’s sewer and water mains, stormwater drains and/or easements, and if any further requirements need to be met. 

 

If suitable, the plans will be appropriately stamped.  For Quick Check agent details please refer to Sydney Water’s web site at www.sydneywater.com.au and go to the Building, Developing and Plumbing, then Quick Check or Building and Renovating or telephone 13 20 92.

 

The principal certifying authority is required to ensure that a Quick Check Agent/Sydney Water has appropriately stamped the plans before commencing works.

 

The following conditions are imposed to promote ecologically sustainable development and energy efficiency.

 

10.     In accordance with Section 80A (11) of the Environmental Planning and Assessment Act 1979 and Clause 97A of the Environmental Planning and Assessment Regulation 2000, it is a prescribed condition that all of the required commitments listed in the relevant BASIX Certificate for this development are fulfilled.

 

11.     In accordance with the provisions of the Environmental Planning & Assessment Regulation 2000, a relevant BASIX Certificate and associated documentation must be submitted to the Certifying Authority with the Construction Certificate application for this development.

 

The required commitments listed and identified in the BASIX Certificate are to be included on the plans, specifications and associated documentation for the proposed development, to the satisfaction of the Certifying Authority.

 

The design of the building must not be inconsistent with the development consent and any proposed variations to the building to achieve the BASIX commitments may necessitate a new development consent or amendment to the existing consent to be obtained, prior to a construction certificate being issued.

 

12.     The following provisions are to be implemented in accordance with the relevant BASIX Certificate and details are to be included in the Construction Certificate documentation (as applicable), to the satisfaction of the Certifying Authority:

 

·                     Stormwater management (i.e. rainwater tanks)

·                     Water efficiency (i.e. triple A rated taps and showers, dual flush toilets and water re-use)

·                     Landscaping provisions

·                     Thermal comfort (i.e. construction materials, glazing and insulation)

·                     Energy efficiency (i.e. cooling & heating provisions and hot water systems)

 

13.     In accordance with Clause 154B of the Environmental Planning & Assessment Regulation 2000, a Certifying Authority must not issue a final Occupation Certificate for this development, unless it is satisfied that each of the required BASIX commitments have been fulfilled.

 

Relevant documentary evidence of compliance with the BASIX commitments is to be forwarded to the Council upon issuing the final Occupation Certificate.

 

Development not subject to BASIX provisions

 

14.     The consumption of water within the building shall be minimised by the use of triple A rated water efficient plumbing fixtures (taps and shower roses) and water efficient dual flush toilets.  Details of compliance are to be noted in the construction certificate plans or specifications.

 

15.     External timber or metal framed and brick veneer walls and roofs are to be provided with insulation (i.e. bulk insulation and a reflective building membrane/reflective sarking/foil insulation), having a minimum total thermal resistance R–value of 3.0 in roofs and 1.5 in external walls.  The insulation and reflective building membrane is to be installed in accordance with the relevant requirements of the Building Code of Australia and the manufacturer’s details.

 

Details of compliance with the requirements for insulation are to be included in the construction certificate application.

 

16.     Hot water service pipes are to be provided with insulation and must also satisfy any relevant requirements of Building Code of Australia and AS 3500.

 

The following group of conditions have been applied to ensure that adequate drainage is provided from the premises and to maintain adequate levels of health and amenity in the locality:

 

17.     Surface water/stormwater must be drained and discharged to the street gutter or suitably designed absorption pit, to the satisfaction of the Certifying Authority and details are to be included in the construction certificate application for the development.

 

Absorption pits must be located not less than 3m from any adjoining premises and the stormwater must not be directed or flow onto any adjoining premises or cause a nuisance.

 

Details of any works proposed to be carried out in or on a public road/footway are to be submitted to and approved by Council prior to commencement of works.

 

18.     External paths and ground surfaces are to be constructed at appropriate levels and be graded and drained away from the building and adjoining premises, so as not to result in the entry of water into the building, or cause a nuisance or damage to the adjoining premises.

 

The following conditions are applied to ensure that the development satisfies the provisions of the Environmental Planning and Assessment Act 1979 and Regulations:

 

19.     The requirements and provisions of the Environmental Planning & Assessment Act 1979 and Environmental Planning & Assessment Regulation 2000, must be fully complied with at all times.

 

Failure to comply with these legislative requirements is an offence and may result in the commencement of legal proceedings, issuing of `on-the-spot` penalty infringements or service of a notice and order by Council.

 

20.     All new building work must be carried out in accordance with the provisions of the Building Code of Australia (BCA), in accordance with Clause 98 of the Environmental Planning and Assessment Regulation 2000.

 

21.     Prior to the commencement of any building works, a construction certificate must be obtained from the Council or an accredited certifier, in accordance with the provisions of the Environmental Planning & Assessment Act 1979 and Environmental Planning & Assessment Regulation 2000.

 

A copy of the construction certificate, the approved plans & specifications and development consent conditions must be kept on the site at all times and be made available to the Council officers and all building contractors for assessment.

 

22.     Prior to the commencement of any building works, the person having the benefit of the development consent must: -

 

i)     appoint a Principal Certifying Authority for the building work; and

 

ii)     appoint a principal contractor for the building work, or in relation to residential building work, obtain an owner-builder permit in accordance with the requirements of the Home Building Act 1989, and notify the Principal Certifying Authority and Council accordingly in writing; and

 

iii)    unless the person having the benefit of the consent is the principal contractor (i.e. owner-builder), notify the principal contractor of the required critical stage inspections and other inspections to be carried out, as specified by the Principal Certifying Authority; and

 

iv)    give at least two days notice to the Council, in writing, of the person’s intention to commence building works.

 

In relation to residential building work, the principal contractor must be the holder of a contractor licence, in accordance with the provisions of the Home Building Act 1989.

 

23.     The building works must be inspected by the Principal Certifying Authority (or another certifying authority if the Principal Certifying Authority agrees), in accordance with sections 109 E (3) of the Environmental Planning & Assessment Act 1979 and clause 162A of the Environmental Planning & Assessment Regulation 2000, to monitor compliance with the relevant standards of construction, Council’s development consent and the construction certificate.

 

The Principal Certifying Authority must specify the relevant stages of construction to be inspected in accordance with section 81A (2) (b1) (ii) of the Environmental Planning & Assessment Regulation 2000 and a satisfactory inspection must be carried out, to the satisfaction of the Principal Certifying Authority, prior to proceeding to the subsequent stages of construction or finalisation of the works (as applicable).

 

Documentary evidence of the building inspections carried out and details of compliance with Council’s consent is to be maintained by the Principal Certifying Authority.  Details of critical stage inspections carried out and copies of certification relied upon must also be forwarded to Council with the occupation certificate.

 

The principal contractor or owner-builder (as applicable) must ensure that the required critical stage and other inspections, as specified in the Principal Certifying Authority’s “Notice of Critical Stage Inspections”, are carried out to the satisfaction of the Principal Certifying Authority and at least 48 hours notice (excluding weekends and public holidays) is to be given to the Principal Certifying Authority, to carry out the required inspection, before carrying out any further works.

 

24.     A sign must be erected and maintained in a prominent position on the site for the duration of the works, which contains the following details:

 

·                     name, address, contractor licence number and telephone number of the principal contractor, including a telephone number at which the person may be contacted outside working hours, or owner-builder permit details (as applicable);

·                     name, address and telephone number of the Principal Certifying Authority; and

·                     a statement stating that “unauthorised entry to the work site is prohibited”.

 

25.     An Occupation Certificate must be obtained from the Principal Certifying Authority prior to any occupation of the building work encompassed in this development consent (including alterations and additions to existing buildings), in accordance with the relevant provisions of the Environmental Planning & Assessment Act 1979.

 

An Occupation Certificate must not be issued for the development if the development is inconsistent with the development consent.  The requirements of the Environmental Planning & Assessment Act 1979 and conditions of development consent must be satisfied prior to the issuing of an occupation certificate.

 

26.     Prior to the issuing of an interim or final occupation certificate, a statement is required to be obtained from the Principal Certifying Authority, which confirms that the development is not inconsistent with the development consent and the relevant conditions of development consent have been satisfied.

 

Details of critical stage inspections carried out by the principal certifying authority together with any other certification relied upon and must also be provided to Council with the occupation certificate.

 

27.     In accordance with clause 98 of the Environmental Planning and Assessment Regulation 2000, it is a prescribed condition, that in the case of residential building work, a contract of insurance must be obtained and in force, in accordance with the provisions of the Home Building Act 1989.

 

Where the work is to be done by a licensed contractor, excavation or building work must not be carried out unless the Principal Certifying Authority (PCA): -

 

·                     has been informed in writing of the licensee’s name and contractor number; and

·                     is satisfied that the licensee has complied with the insurance requirements of Part 6 of the Home Building Act 1989, or

 

Where the work to be done by any other person (i.e. an owner-builder), excavation or building work must not be carried out unless the Principal Certifying Authority: -

 

·                     has been informed of the person’s name and owner-builder permit number; or

·                     has been given a declaration, signed by the owner of the land that states that the market cost of the labour and materials involved in the work does not exceed $5,000.

 

Details of the principal building contractor and compliance with the provisions of the Home Building Act 1989 (i.e. Details of the principal licensed building contractor and a copy of the Certificate of Insurance) are to be submitted to Council prior to the commencement of works, with the notice of appointment of the PCA / notice of intention to commence building work.

 

28.     The required Long Service Levy payment, under the Building and Construction Industry Long Service Payments Act 1986, is to be forwarded to the Long Service Levy Corporation or the Council, prior to the issuing of a Construction Certificate, in accordance with Section 109F of the Environmental Planning & Assessment Act 1979.

 

At the time of this development consent, Long Service Levy payment is applicable on building work having a value of $25,000 or more, at the rate of 0.35% of the cost of the works.

 

29.     Smoke alarms are required to be installed in each Class 1 building or residential dwelling in accordance with the relevant provisions of Part 3.7.2 of the B.C.A. – Housing Provisions.

 

Smoke alarms must comply with AS3786 – Smoke alarms and be connected to the consumer mains electric power supply and provided with a battery back-up.

 

The smoke alarms are to be installed in suitable locations on or near the ceiling, in any storey containing bedrooms; located between each part of the dwelling containing the bedrooms and the remainder of the dwelling, or where bedrooms are served by a hallway, the smoke alarms are to be located in that hallway; and smoke alarms are to be installed in any other storey not containing bedrooms, to the satisfaction of the certifying authority.

 

Smoke alarms are not to be located in ‘dead-air-spaces’, in the corner junction of walls and ceilings between exposed rafters/joists or at the apex of raked ceilings, as detailed in Part 3.7.2 of the Building Code of Australia – Housing Provisions.

 

Details of compliance with the provisions of the Building Code of Australia must be included in the plans/specification for the construction certificate.

 

The following conditions are applied to ensure that the development satisfies relevant standards of construction, and to maintain adequate levels of health, safety and amenity during construction:

 

30.     The demolition of buildings and the removal, storage, handling and disposal of building materials (including asbestos) must be carried out in accordance with the relevant requirements of WorkCover NSW, the NSW Department of Environment & Conservation (formerly the Environment Protection Authority) and Randwick City Council policies and conditions, including:

 

·                     Occupational Health and Safety Act 2000

·                     Occupational Health and Safety (Hazardous Substances) Regulation 2001

·                     Occupational Health and Safety (Asbestos Removal Work) Regulation 2001

·                     WorkCover NSW Code of Practice for the Safe Removal of Asbestos

·                     Australian Standard 2601 (2001) – Demolition of Structures

·                     The Protection of the Environment Operations Act 1997 and Protection of the Environment Operations (Waste) Regulation 1996.

·                     Relevant Department of Environment & Conservation (DEC) / Environment Protection Authority (EPA) and WorkCover NSW Guidelines.

·                     Randwick City Council Asbestos Policy (adopted 13 September 2005)

 

A copy of Council’s Asbestos Policy is available on Council’s web site at www.randwick.nsw.gov.au in the Building & Development section or a copy can be obtained from Council’s Customer Service Centre.

 

31.     A Demolition Work Plan must be prepared for the development in accordance with Australian Standard AS2601-2001, Demolition of Structures.

 

The Work Plan must include the following information (as applicable):

·                     The name, address, contact details and licence number of the Demolisher /Asbestos Removal Contractor

·                     Details of hazardous materials, including asbestos

·                     Method/s of demolition and removal of asbestos

·                     Measures and processes to be implemented to ensure the health & safety of workers and community

·                     Measures to be implemented to minimise any airborne asbestos and dust

·                     Methods and location of disposal of any asbestos or other hazardous materials

·                     Other relevant details, measures and requirements to be implemented as identified in the Asbestos Survey

·                     Date the demolition and removal of asbestos will commence

 

The Demolition Work Plan must be submitted to Council and the Principal Certifying Authority (PCA) if the Council is not the PCA, not less than two (2) working days before commencing any demolition works involving asbestos products or materials.  A copy of the Demolition Work Plan must also be maintained on site and be made available to Council officers upon request.

 

Note it is the responsibility of the persons undertaking demolition work to obtain the relevant WorkCover licences and permits.

 

32.     Any work involving the demolition, storage and disposal of asbestos products and materials must be carried out in accordance with the following requirements:

 

a.       Relevant Occupational Health & Safety legislation and WorkCover NSW requirements

 

b.       Randwick City Council’s Asbestos Policy (adopted 13 September 2005)

 

c.       A WorkCover licensed demolition or asbestos removal contractor must undertake removal of more than 50 m2 of bonded asbestos (or as otherwise specified by WorkCover or relevant legislation).

Removal of friable asbestos material must only be undertaken by contractor that holds a current friable asbestos removal licence.

 

d.       On sites involving the removal of asbestos, a sign must be clearly displayed in a prominent visible position at the front of the site, containing the words ‘DANGER ASBESTOS REMOVAL IN PROGRESS’ and include details of the licensed contractor.

 

e.       Asbestos waste must be stored, transported and disposed of in compliance with the Protection of the Environment Operations Act 1997 and the Protection of the Environment Operations (Waste) Regulation 1996.

 

f.        A Clearance Certificate or Statement, prepared by a suitably qualified person (i.e. an occupational hygienist, licensed asbestos removal contractor, building consultant, architect or experienced licensed building contractor), must be provided to Council upon completion of the works prior to an Occupation Certificate being issued, which confirms that the asbestos material have been removed appropriately and the relevant conditions of consent have been satisfied.

 

A copy of Council’s Asbestos Policy is available on Council’s web site at www.randwick.nsw.gov.au in the Building & dev can be obtained from Council’s Customer Service Centre.

 

33.     All excavations and backfilling associated with the erection or demolition of a building must be executed safely in accordance with appropriate professional standards and excavations are to be properly guarded and supported to prevent them from being dangerous to life, property or buildings.

 

Retaining walls, shoring or piling must be provided to support land which is excavated in association with the erection or demolition of a building, to prevent the movement of soil and to support the adjacent land and buildings, if the soil conditions require it.  Adequate provisions are also to be made for drainage.

 

Retaining walls, shoring, or piling must be designed and installed in accordance with appropriate professional standards and the relevant requirements of the Building Code of Australia and Australian Standards.  Details of proposed retaining walls, shoring or piling are to be submitted to and approved by the Principal Certifying Authority for the development prior to commencing such excavations or works.

 

34.     Except with the written approval of Council’s Manager of Health, Building & Regulatory Services, all building, demolition and associated site works (including site deliveries) must only be carried out between the hours of 7.00am to 5.00pm on Monday to Friday inclusive and between 8.00am to 5.00pm on Saturdays and all building activities are strictly prohibited on Sundays and Public Holidays.

 

In addition, the use of any rock excavation machinery or any mechanical pile drivers or the like, is restricted to the hours of 8.00am to 5.00pm (maximum) on Monday to Friday only, to minimise the noise levels during construction and loss of amenity to nearby residents.

 

35.     Noise and vibration emissions during the construction of the building and associated site works must not result in damage to nearby premises or result in an unreasonable loss of amenity to nearby residents and the relevant provisions of the Protection of the Environment Operations Act 1997 must be satisfied at all times.

         

36.     Public safety and convenience must be maintained at all times during demolition, excavation and construction works.

 

The roadway, footpath and nature strip must be maintained in a good, safe condition and free from any obstructions, materials, soils or debris at all times.  Any damage caused to the road, footway or nature strip must be repaired immediately, to the satisfaction of Council.

 

A Road Opening Permit must be obtained from the Council and other relevant Authorities prior to excavating or opening-up the road or footway for services or the like.

 

Any part of Council’s nature strip which is damaged as a result of the work must be back-filled, top-soiled and re-turfed with kikuyu turf prior to occupation or finalisation of the development, to Council’s satisfaction.

 

37.     Building materials, sand, soil, waste materials or construction equipment must not be placed upon the footpath, roadway or nature strip at any time and the footpath, nature strip and road must be maintained in a clean condition and free from any obstructions, soil and debris at all times.

 

Bulk bins/waste containers must not be located upon the footpath, roadway or nature strip at any time without the prior written approval of the Council, unless the waste container is located upon the road in accordance with the Roads & Traffic Authority Guidelines and Requirements, and the container is exempt from an approval under Development Control Plan for Exempt & Complying Development and Council’s Local Approvals Policy.  Applications to place a waste container in a public place can be made to Council’s Building Services section.

 

38.     During construction stages, sediment laden stormwater run-off shall be controlled using the sediment control measures outlined in the manual for Managing Urban Stormwater – Soils and Construction, published by the NSW Department of Housing

 

Stockpiles of soil, sand, aggregate or other materials must not be located on any footpath, roadway, nature strip, drainage line or any public place and the stockpiles must be protected with adequate sediment control measures.

 

Building operations such as brick cutting, washing tools or equipment and mixing mortar are not permitted on public footpaths, roadways, nature strips, in any public place or any location which may lead to the discharge of materials into the stormwater drainage system.

 

A warning sign for soil and water management must be displayed in a prominent position on the building site, visible to both the public and site workers.  The sign must be displayed throughout the construction period.  Copies of a suitable warning sign are available at Council’s Customer Service Centre for a nominal fee.

 

39.     Public safety must be maintained at all times and public access to the site and building works, materials and equipment on the site is to be restricted, when work is not in progress or the site is unoccupied.

 

A temporary safety fence is to be provided to protect the public, located to the perimeter of the site (unless the site is separated from the adjoining land by an existing structurally adequate fence, having a minimum height of 1.5 metres).  Temporary fences are to have a minimum height of 1.8 metres and be constructed of cyclone wire fencing, with geotextile fabric attached to the inside of the fence to provide dust control, or other material approved by Council.

 

Temporary site fences are to be structurally adequate, safe and be constructed in a professional manner and the use of poor quality materials or steel reinforcement mesh as fencing is not permissible.

 

The public safety provisions and temporary fences must be in place prior to the commencement of any demolition, excavation or building works and be maintained throughout construction.

 

If it is proposed to locate any site fencing, hoardings or amenities upon a footpath or public place, the written consent from Council’s Building Services section must be obtained beforehand and detailed plans are to be submitted to Council for consideration, together with payment of the weekly charge in accordance with Council’s adopted fees and charges.

 

40.     A local approval application must be submitted to and be approved by Council's Building Services section prior to commencing any of the following activities on a footpath, road, nature strip or in any public place:-

 

·                     Install or erect any site fencing, hoardings or site structures

·                     Operate a crane or hoist goods or materials over a footpath or road

·                     Placement of a waste skip (greater than 3m in length) or any container or other article.

 

The following group of conditions have been applied to ensure the structural adequacy and integrity of the proposed building and adjacent premises:

 

41.     A Certificate of Adequacy supplied by a professional engineer shall be submitted to the certifying authority (and the Council, if the Council is not the certifying authority) prior to a construction certificate being issued for the development, certifying the structural adequacy of the existing structure to support the additional storey/upper floor addition.

 

The following conditions are applied to ensure compliance with the Swimming Pools Act 1992 and to maintain public safety and amenity:

 

42.     Swimming pools are to be provided with childproof fences and self-locking gates, in accordance with the Swimming Pools Act 1992 and regulations.

 

The swimming pool is to be surrounded by a fence having a minimum height of 1.2m, that separates the pool from any residential building situated on the premises and from any place (whether public or private) adjoining the premises; and that is designed, constructed and installed in accordance with AS 1926-1986.

 

Gates to pool area shall be a maximum width of 1 metre, and be self-closing and latching; the gate is required to open outwards from the pool area and prevent a small child opening the gate or door when the gate or door is closed.

 

Temporary pool safety fencing is to be provided pending the completion of all building work and the pool must not be filled until a fencing inspection has been carried out and approved by the principal certifying authority.

 

A sign shall be erected in a prominent position in the immediate vicinity of the swimming pool, in accordance with the document entitled “Policy Statement No.9.4.1: Guidelines for the Preparation of Posters on Resuscitation”, published in 1985 by the Australian Resuscitation Council and the sign must bear a notice that contains the words “YOUNG CHILDREN SHOULD BE SUPERVISED WHEN USING THIS SWIMMING POOL”, together with details of resuscitation techniques (for adults, children and infants) set out in accordance with the document entitled “Cardio Pulmonary Resuscitation” published by the Australian Resuscitation Council.

 

43.     Spa pools are to be provided with a child resistant barrier, in accordance with the provisions of the Swimming Pools Act 1992 and regulations.

 

A sign shall be erected in a prominent position in the immediate vicinity of the swimming pool, in accordance with the document entitles “Policy Statement No. 9.4.1; Guidelines for the Preparation of Posters on Resuscitation”, published in 1985 by the Australian Resuscitation Council and the sign must bear a notice that contains the words “YOUNG CHILDREN SHOULD BE SUPERVISED WHEN USING THIS SWIMMING POOL”, together with details of resuscitation techniques (for adults, children and infants) set out in accordance with the document entitles “Cardio Pulmonary Resuscitation: published by the Australian Resuscitation Council.

 

44.     Swimming pools are to be designed, installed and operated in accordance with the following general requirements: -

 

·                     Backwash of the pool filter and other discharge of water is to be drained to the sewer in accordance with the requirements of the Sydney Water Corporation; and

·                     All pool overflow water is to be drained away from the building and adjoining premises, so as not to result in a nuisance or damage to premises; and

·                     Pool plant and equipment is to be enclosed in a sound absorbing enclosure or installed within a building, to minimise noise emissions and possible nuisance to nearby residents; and

·                     The pool plant and equipment shall not be operated during the following hours if the noise emitted can be heard within a habitable room in any other residential premises, or, as otherwise specified in relevant Noise Control Regulations:

 

·         before 8.00am or after 8.00pm on any Sunday or public holiday; or

·         before 7.00am or after 8.00pm on any other day.

 

The following conditions have been applied to ensure that noise emissions from the development satisfy legislative requirements and maintain reasonable levels of amenity to the area:

 

45.     The operation of all plant and equipment shall not give rise to an ‘offensive noise’ as defined in the Protection of the Environment Operations Act 1997 and Regulations.

 

In this regard, the operation of the plant and equipment shall not give rise to an LAeq, 15 min sound pressure level at any affected premises that exceeds the background LA90, 15 min noise level, measured in the absence of the noise source/s under consideration by more than 5dB(A) in accordance with relevant NSW Department of Environment & Conservation Noise Control Guidelines.

 

46.     The air conditioning plant and equipment shall not be operated during the following hours if the noise emitted can be heard within a habitable room in any other residential premises, or, as otherwise specified in relevant Noise Control Regulations:

 

·         before 8.00am or after 10.00pm on any Saturday, Sunday or public

     holiday; or

·         before 7.00am or after 10.00pm on any other day.

 

47.     The installation of rainwater tanks shall comply with the following noise control requirements:-

 

a)     The operation of all plant and equipment shall not give rise to an ‘offensive noise’ as defined in the Protection of the Environment Operations Act 1997 and Regulations.

 

In this regard, the operation of the plant and equipment shall not give rise to an LAeq, 15 min sound pressure level at any affected premises that exceeds the background LA90, 15 min noise level, measured in the absence of the noise source/s under consideration by more than 5dB(A) in accordance with relevant NSW Department of Environment & Conservation Noise Control Guidelines.

 

b)     Plant and equipment associated with rainwater tank(s) are to be enclosed in a sound absorbing enclosure or installed within a building, to minimise noise emissions and possible nuisance to nearby residents.

 

c)     The operation of plant and equipment associated with the rainwater tank(s)  are to be restricted to the following hours if the noise emitted can be heard within a habitable room in any other residential premises:

 

·         before 8.00am or after 8.00pm on weekends or public holiday; or

·         before 7.00am or after 8.00pm on weekdays.

 

The following conditions are applied to satisfy the relevant pollution control criteria and to maintain reasonable levels of health, safety and amenity to the locality:

 

48.     The use and operation of the premises shall not give rise to an environmental health or public nuisance.

 

49.     There are to be no emissions or discharges from the premises which give rise to a public nuisance or result in an offence under the Protection of the Environment Operations Act 1997 and Regulations.

 

The following conditions are applied to provide adequate security against damage to Council’s infrastructure:

 

50.     The following damage/civil works security deposit requirement is to be complied with prior to a construction certificate being issued for the development, as security for making good any damage caused to the roadway, footway, verge or any public place; or as security for completing any public work; and for remedying any defect on such public works, in accordance with section 80A(6) of the Environmental Planning and Assessment Act 1979:

 

a)       $1000.00       -        Damage / Civil Works Security Deposit

 

The damage/civil works security deposit may be provided by way of a cash or cheque with the Council and is refundable upon:

 

·                     A satisfactory inspection by Council that no damage has occurred to the Council assets such as roadway, kerb, guttering, drainage pits footway, or verge; and

 

·                     Completion of the civil works as conditioned in this development consent by Council.

 

The applicant is to advise Council, in writing, of the completion of all building works and/or obtaining an occupation certificate, if required.

 

The applicant is to advise Council in writing and/or photographs of any signs of existing damage to the Council roadway, footway, or verge prior to the commencement of any building/demolition works.

 

The following conditions are applied to provide adequate provisions for access, transport and infrastructure:

 

51.     Prior to the issuing of a final occupation certificate the applicant must meet the full cost for Council or a Council approved contractor to:

 

a.  Construct concrete vehicular crossing and layback at kerb opposite the vehicular entrance to the site in Carrington Road.

 

b.  Remove the redundant portion of the layback in Carey St and to reinstate the area with integral kerb and gutter to Council's specification.

 

52.     The applicant must meet the full cost for Council or a Council approved contractor to repair/replace any damaged sections of Council's footpath, kerb & gutter, nature strip etc which are due to building works being carried out at the above site. This includes the removal of cement slurry from Council's footpath and roadway.

 

53.     The applicant shall note that all external work, carried out on Council property, shall be in accordance with Council's Policy for "Vehicular Access and Road and Drainage Works". An application for the cost of the Council civil works is to be submitted to Council at the completion of the internal building works. An application fee shall be payable to Council for the quotation of the required works. The applicant may elect to use his contractor for the required works, subject to Council approval, however a design and supervision fee based on the lowest quotation from Council's nominated contractor will be required to be paid prior to the commencement of any works.

 

The following conditions are applied to provide adequate provisions for future civil works in the road reserve:

 

54.     The Council’s Development Engineer has inspected the above site and has determined that the design alignment level (concrete/paved/tiled level) at the property boundary for the driveways, access ramps and pathways along the Carrington Road frontage, shall be:

 

·             100mm above the back of the existing council footpath at all points opposite the footpath, along the full site frontage.

 

55.     The design alignment levels (concrete/paved/tiled level) issued by Council and their relationship to the footpath must be indicated on the building plans for the construction certificate. The design alignment level at the street boundary, as issued by the Council, must be strictly adhered to.

 

56.     The above alignment levels and the site inspection by Council’s Development Engineer have been issued at a prescribed fee of $121.00 (inclusive of GST). This amount is to be paid prior to a construction certificate being issued for the development.

 

57.     The top of footings of any structures constructed on the boundary alignment must be at least 150mm below the alignment level as specified for the vehicular access.  This condition has been attached to accommodate future footpath construction at this location.

 

The following conditions are applied to provide adequate consideration for service authority assets:

 

58.     A public utility impact assessment must be carried out on all public utility services on the site, roadway, nature strip, footpath, public reserve or any public areas associated with and/or adjacent to the development/building works and include relevant information from public utility authorities and exploratory trenching or pot-holing, if necessary, to determine the position and level of service.

 

59.     The applicant must meet the full cost for telecommunication companies, gas providers, Energy Australia and Sydney Water to adjust/repair/relocate their services as required.  The applicant must make the necessary arrangements with the service authority.

 

The following conditions are applied to provide adequate provisions for landscaping and to maintain reasonable levels of environmental amenity:

 

Tree Management

 

60.     Permission is granted for the removal of the Cheese Tree located on council’s nature strip in Carrington Road opposite the proposed vehicular entrance to the site. The applicant shall arrange removal of the tree with the Council approved contractor who is to construct the Council vehicular crossing subject to the applicant t

 

61.     The applicant shall submit a total payment of $107.25 to Council being the cost for Council to supply and install 1 x 25 litre street tree (Cheese Tree), between the driveway entrance and the pedestrian gate entrance, at the completion of all works.

 

The contribution shall be paid into Tree Amenity Income account no 4001.768401 at the Cashier on the Ground Floor of the Administrative Centre prior to a construction certificate being issued for the development.

 

The applicant will be required to contact Council’s Landscape Development Officer on 9399-0613, giving at least two working weeks notice, to arrange for planting of the replacement Cheese street tree upon completion of the vehicular crossing.

 

ADVISORY MATTERS:

 

A1      Building or excavations works must not be commenced until a construction certificate has been obtained from Council's Building Certification Services or an Accredited Certifier and either Council's Building Certification Services or an Accredited Certifier has been appointed as the Principal Certifying Authority (PCA) for this development.

 

Failure to obtain a Construction Certificate and appoint a PCA before commencing works is an offence, which renders the responsible person liable to a maximum penalty of $1.1 million under the Environmental Planning & Assessment Act 1979.

 

A2      The applicant is advised that the Construction Certificate plans and specification must comply with the provisions of the Building Code of Australia (BCA) and the construction certificate must not be inconsistent with the development consent.

 

In this regard, the development consent plans do not detail compliance with the deemed-to-satisfy provisions of the BCA.

 

Details of compliance with the relevant provisions of the Building Code of Australia and conditions of development consent are to be provided in the plans and specifications for the construction certificate.

 

You are therefore advised to ensure that the development is not inconsistent with Council's consent and to consult with Council’s Building Certification Services or an accredited certifier prior to submitting your construction certificate application to enable these matters to be addressed accordingly.

 

A3      The applicant is to advise Council in writing and/or photographs of any signs of existing damage to the Council roadway, footway, or verge prior to the commencement of any building/demolition works.

 

MOTION: (Andrews/Belleli) CARRIED – SEE RESOLUTION.

 

6.3      DEVELOPMENT APPLICATION REPORT - 8 NOLAN AVENUE, CLOVELLY.  (DA/532/2007 & PROP029581)

 

H86        RESOLUTION:  (Andrews/Tracey) that Council as the responsible authority grant its development consent under Section 80 and 80A of the Environmental Planning and Assessment Act 1979 (as amended) to Development Application NoDA/532/2007 & PROP029581. for Alterations and additions to rear of existing dwelling at ground level plus attic level. at 8 Nolan Avenue, Clovelly subject to the following conditions:-

 

The following conditions are applied to satisfy the provisions of section 79C of the Environmental Planning and Assessment Act 1979 and to maintain reasonable levels of environmental amenity:

 

1.       The development must be implemented substantially in accordance with the plans drawn by Hill Thalis Architecture and Urban Projects, numbered DA.01, DA.02, DA.03, DA.03a, and DA.04, dated June 2007, received by Council on 9 August 2007, and the plan numbered DA.03b and dated September 2007 and received by Council on 19 September 2007, the application form and on any supporting information received with the application, except as may be amended by the following conditions and as may be shown in red on the attached plans.

 

2.       The colours, materials and finishes of the external surfaces to the building are to be compatible with the adjacent development to maintain the integrity and amenity of the building and the streetscape.

 

Details of the proposed colours, materials and textures (i.e. a schedule and brochure/s or sample board) are to be submitted to and approved by Council’s Director of City Planning, in accordance with section 80A (2) of the Environmental Planning and Assessment Act 1979 prior to a construction certificate being issued for the relevant building works.

 

3.       Metal roof sheeting is to be painted or colour bonded to minimise reflection and to be sympathetic and compatible with the building and surrounding environment.

 

4.       There must be no encroachment of the structure/s onto any adjoining premises or onto Council’s road reserve, footway or public place, unless permission has been obtained from the owner/s of the adjoining land accordingly.

 

5.       No cooking facilities or sanitary fittings other than those indicated on the approved plans are to be installed in the premises without the prior written consent of the Council.

 

6.       The rear ground floor deck and pergola structure shall be setback from the western boundary a minimum distance of 1.2m. The privacy wall shall be deleted. Details of compliance are to be provided in the construction certificate plans.

 

7.     The louvres to the east facing window to the attic level shall not be adjustable below the horizontal angle. Details of compliance are to be submitted to and approved by Council’s Director of City Planning, in accordance with section 80A (2) of the Environmental Planning and Assessment Act 1979prior to a construction certificate being issued for the relevant building works.

 

8.       A dilapidation report prepared by a professional engineer or suitably qualified and experienced building surveyor shall be submitted to the certifying authority prior to the commencement of demolition, excavation or building works detailing the current condition and status of all buildings, including ancillary structures (i.e. including dwellings, residential flat buildings, commercial/industrial building, garages, carports, verandah’s, fences, retaining walls, swimming pools and driveways etc.) located upon no.6 Nolan Avenue, Clovelly.

 

The report is to be supported with photographic evidence of the status and condition of the buildings and a copy of the report must also be forwarded to the Council and to the owners of the abovestated premises, prior to the commencement of any works.

 

The following condition is imposed to satisfy relevant requirements of the Sydney Water Corporation.

 

9.       All building, plumbing and drainage work must be carried out in accordance with the requirements of the Sydney Water Corporation.

 

The approved Construction Certificate plans must be submitted to a Sydney Water Quick Check agent or Customer Centre prior to commencing any building or excavation works, to determine whether the development will affect Sydney Water’s sewer and water mains, stormwater drains and/or easements, and if any further requirements need to be met. 

 

If suitable, the plans will be appropriately stamped.  For Quick Check agent details please refer to Sydney Water’s web site at www.sydneywater.com.au and go to the Building, Developing and Plumbing, then Quick Check or Building and Renovating or telephone 13 20 92.

 

The principal certifying authority is required to ensure that a Quick Check Agent/Sydney Water has appropriately stamped the plans before commencing works.

 

The following conditions are imposed to promote ecologically sustainable development and energy efficiency.

 

10.     In accordance with Section 80A (11) of the Environmental Planning and Assessment Act 1979 and Clause 97A of the Environmental Planning and Assessment Regulation 2000, it is a prescribed condition that all of the required commitments listed in the relevant BASIX Certificate for this development are fulfilled.

 

11.     In accordance with the provisions of the Environmental Planning & Assessment Regulation 2000, a relevant BASIX Certificate and associated documentation must be submitted to the Certifying Authority with the Construction Certificate application for this development.

 

The required commitments listed and identified in the BASIX Certificate are to be included on the plans, specifications and associated documentation for the proposed development, to the satisfaction of the Certifying Authority.

 

The design of the building must not be inconsistent with the development consent and any proposed variations to the building to achieve the BASIX commitments may necessitate a new development consent or amendment to the existing consent to be obtained, prior to a construction certificate being issued.

 

12.     The following provisions are to be implemented in accordance with the relevant BASIX Certificate and details are to be included in the Construction Certificate documentation (as applicable), to the satisfaction of the Certifying Authority:

 

·                     Stormwater management (i.e. rainwater tanks)

·                     Water efficiency (i.e. triple A rated taps and showers, dual flush toilets and water re-use)

·                     Landscaping provisions

·                     Thermal comfort (i.e. construction materials, glazing and insulation)

·                     Energy efficiency (i.e. cooling & heating provisions and hot water systems)

 

13.     In accordance with Clause 154B of the Environmental Planning & Assessment Regulation 2000, a Certifying Authority must not issue a final Occupation Certificate for this development, unless it is satisfied that each of the required BASIX commitments have been fulfilled.

 

Relevant documentary evidence of compliance with the BASIX commitments is to be forwarded to the Council upon issuing the final Occupation Certificate.

 

The following group of conditions have been applied to ensure that adequate drainage is provided from the premises and to maintain adequate levels of health and amenity in the locality:

 

14.     Surface water/stormwater must be drained and discharged to the street gutter or suitably designed absorption pit, to the satisfaction of the Certifying Authority and details are to be included in the construction certificate application for the development.

 

Absorption pits must be located not less than 3m from any adjoining premises and the stormwater must not be directed or flow onto any adjoining premises or cause a nuisance.

 

Details of any works proposed to be carried out in or on a public road/footway are to be submitted to and approved by Council prior to commencement of works.

 

15.     External paths and ground surfaces are to be constructed at appropriate levels and be graded and drained away from the building and adjoining premises, so as not to result in the entry of water into the building, or cause a nuisance or damage to the adjoining premises.

 

The following conditions are applied to ensure that the development satisfies the provisions of the Environmental Planning and Assessment Act 1979 and Regulations:

 

16.     The requirements and provisions of the Environmental Planning & Assessment Act 1979 and Environmental Planning & Assessment Regulation 2000, must be fully complied with at all times.

 

Failure to comply with these legislative requirements is an offence and may result in the commencement of legal proceedings, issuing of `on-the-spot` penalty infringements or service of a notice and order by Council.

 

17.     All new building work must be carried out in accordance with the provisions of the Building Code of Australia (BCA), in accordance with Clause 98 of the Environmental Planning and Assessment Regulation 2000.

 

18.     Prior to the commencement of any building works, a construction certificate must be obtained from the Council or an accredited certifier, in accordance with the provisions of the Environmental Planning & Assessment Act 1979 and Environmental Planning & Assessment Regulation 2000.

 

A copy of the construction certificate, the approved plans & specifications and development consent conditions must be kept on the site at all times and be made available to the Council officers and all building contractors for assessment.

 

19.     Prior to the commencement of any building works, the person having the benefit of the development consent must: -

 

i)     appoint a Principal Certifying Authority for the building work; and

 

ii)     appoint a principal contractor for the building work, or in relation to residential building work, obtain an owner-builder permit in accordance with the requirements of the Home Building Act 1989, and notify the Principal Certifying Authority and Council accordingly in writing; and

 

iii)    unless the person having the benefit of the consent is the principal contractor (i.e. owner-builder), notify the principal contractor of the required critical stage inspections and other inspections to be carried out, as specified by the Principal Certifying Authority; and

 

iv)    give at least two days notice to the Council, in writing, of the person’s intention to commence building works.

 

         In relation to residential building work, the principal contractor must be the holder of a contractor licence, in accordance with the provisions of the Home Building Act 1989.

 

20.     The building works must be inspected by the Principal Certifying Authority (or another certifying authority if the Principal Certifying Authority agrees), in accordance with sections 109 E (3) of the Environmental Planning & Assessment Act 1979 and clause 162A of the Environmental Planning & Assessment Regulation 2000, to monitor compliance with the relevant standards of construction, Council’s development consent and the construction certificate.

 

The Principal Certifying Authority must specify the relevant stages of construction to be inspected in accordance with section 81A (2) (b1) (ii) of the Environmental Planning & Assessment Regulation 2000 and a satisfactory inspection must be carried out, to the satisfaction of the Principal Certifying Authority, prior to proceeding to the subsequent stages of construction or finalisation of the works (as applicable).

 

Documentary evidence of the building inspections carried out and details of compliance with Council’s consent is to be maintained by the Principal Certifying Authority.  Details of critical stage inspections carried out and copies of certification relied upon must also be forwarded to Council with the occupation certificate.

 

The principal contractor or owner-builder (as applicable) must ensure that the required critical stage and other inspections, as specified in the Principal Certifying Authority’s “Notice of Critical Stage Inspections”, are carried out to the satisfaction of the Principal Certifying Authority and at least 48 hours notice (excluding weekends and public holidays) is to be given to the Principal Certifying Authority, to carry out the required inspection, before carrying out any further works.

 

21.     A sign must be erected and maintained in a prominent position on the site for the duration of the works, which contains the following details:

 

·                     name, address, contractor licence number and telephone number of the principal contractor, including a telephone number at which the person may be contacted outside working hours, or owner-builder permit details (as applicable);

·                     name, address and telephone number of the Principal Certifying Authority; and

·                     a statement stating that “unauthorised entry to the work site is prohibited”.

 

22.     An Occupation Certificate must be obtained from the Principal Certifying Authority prior to any occupation of the building work encompassed in this development consent (including alterations and additions to existing buildings), in accordance with the relevant provisions of the Environmental Planning & Assessment Act 1979.

 

An Occupation Certificate must not be issued for the development if the development is inconsistent with the development consent.  The requirements of the Environmental Planning & Assessment Act 1979 and conditions of development consent must be satisfied prior to the issuing of an occupation certificate.

 

23.     Prior to the issuing of an interim or final occupation certificate, a statement is required to be obtained from the Principal Certifying Authority, which confirms that the development is not inconsistent with the development consent and the relevant conditions of development consent have been satisfied.

 

Details of critical stage inspections carried out by the principal certifying authority together with any other certification relied upon and must also be provided to Council with the occupation certificate.

 

24.     In accordance with clause 98 of the Environmental Planning and Assessment Regulation 2000, it is a prescribed condition, that in the case of residential building work, a contract of insurance must be obtained and in force, in accordance with the provisions of the Home Building Act 1989.

 

Where the work is to be done by a licensed contractor, excavation or building work must not be carried out unless the Principal Certifying Authority (PCA): -

 

·                 has been informed in writing of the licensee’s name and contractor number; and

·                 is satisfied that the licensee has complied with the insurance requirements of Part 6 of the Home Building Act 1989, or

 

Where the work to be done by any other person (i.e. an owner-builder), excavation or building work must not be carried out unless the Principal Certifying Authority: -

 

·                 has been informed of the person’s name and owner-builder permit number; or

·                 has been given a declaration, signed by the owner of the land that states that the market cost of the labour and materials involved in the work does not exceed $5,000.

 

Details of the principal building contractor and compliance with the provisions of the Home Building Act 1989 (i.e. Details of the principal licensed building contractor and a copy of the Certificate of Insurance) are to be submitted to Council prior to the commencement of works, with the notice of appointment of the PCA / notice of intention to commence building work.

 

25.     The required Long Service Levy payment, under the Building and Construction Industry Long Service Payments Act 1986, is to be forwarded to the Long Service Levy Corporation or the Council, prior to the issuing of a Construction Certificate, in accordance with Section 109F of the Environmental Planning & Assessment Act 1979.

 

At the time of this development consent, Long Service Levy payment is applicable on building work having a value of $25,000 or more, at the rate of 0.35% of the cost of the works.

 

26.     Smoke alarms are required to be installed in each Class 1 building or residential dwelling in accordance with the relevant provisions of Part 3.7.2 of the B.C.A. – Housing Provisions.

 

Smoke alarms must comply with AS3786 – Smoke alarms and be connected to the consumer mains electric power supply and provided with a battery back-up.

 

The smoke alarms are to be installed in suitable locations on or near the ceiling, in any storey containing bedrooms; located between each part of the dwelling containing the bedrooms and the remainder of the dwelling, or where bedrooms are served by a hallway, the smoke alarms are to be located in that hallway; and smoke alarms are to be installed in any other storey not containing bedrooms, to the satisfaction of the certifying authority.

 

Smoke alarms are not to be located in ‘dead-air-spaces’, in the corner junction of walls and ceilings between exposed rafters/joists or at the apex of raked ceilings, as detailed in Part 3.7.2 of the Building Code of Australia – Housing Provisions.

 

Details of compliance with the provisions of the Building Code of Australia must be included in the plans/specification for the construction certificate.

 

The following conditions are applied to ensure that the development satisfies relevant standards of construction, and to maintain adequate levels of health, safety and amenity during construction:

 

27.     The demolition of buildings and the removal, storage, handling and disposal of building materials (including asbestos) must be carried out in accordance with the relevant requirements of WorkCover NSW, the NSW Department of Environment & Conservation (formerly the Environment Protection Authority) and Randwick City Council policies and conditions, including:

 

·                     Occupational Health and Safety Act 2000

·                     Occupational Health and Safety (Hazardous Substances) Regulation 2001

·                     Occupational Health and Safety (Asbestos Removal Work) Regulation 2001

·                     WorkCover NSW Code of Practice for the Safe Removal of Asbestos

·                      Australian Standard 2601 (2001) – Demolition of Structures

·                      The Protection of the Environment Operations Act 1997 and Protection of the Environment Operations (Waste) Regulation 1996.

·                      Relevant Department of Environment & Conservation (DEC) / Environment Protection Authority (EPA) and WorkCover NSW Guidelines.

·                      Randwick City Council Asbestos Policy (adopted 13 September 2005)

 

A copy of Council’s Asbestos Policy is available on Council’s web site at www.randwick.nsw.gov.au in the Building & Development section or a copy can be obtained from Council’s Customer Service Centre.

 

28.     A Demolition Work Plan must be prepared for the development in accordance with Australian Standard AS2601-2001, Demolition of Structures.

 

The Work Plan must include the following information (as applicable):

·                     The name, address, contact details and licence number of the Demolisher /Asbestos Removal Contractor

·                     Details of hazardous materials, including asbestos

·                     Method/s of demolition and removal of asbestos

·                     Measures and processes to be implemented to ensure the health & safety of workers and community

·                     Measures to be implemented to minimise any airborne asbestos and dust

·                     Methods and location of disposal of any asbestos or other hazardous materials

·                     Other relevant details, measures and requirements to be implemented as identified in the Asbestos Survey

·               Date the demolition and removal of asbestos will commence

 

The Demolition Work Plan must be submitted to Council and the Principal Certifying Authority (PCA) if the Council is not the PCA, not less than two (2) working days before commencing any demolition works involving asbestos products or materials.  A copy of the Demolition Work Plan must also be maintained on site and be made available to Council officers upon request.

 

Note it is the responsibility of the persons undertaking demolition work to obtain the relevant WorkCover licences and permits.

 

29.     An Asbestos Survey prepared by a suitably qualified person (i.e. an occupational hygienist, licensed asbestos removal contractor or building consultant), must be submitted prior to the commencement of works.  The asbestos survey shall include details for managing the removal of asbestos from the site.  The demolition, removal and disposal of any asbestos materials must be carried out in accordance with Council’s Asbestos Policy and relevant workcare requirements.

 

30.     A WorkCover licensed demolition or asbestos removal contractor must undertake removal of more than 50m2 of bonded asbestos (or as otherwise specified by WorkCover or relevant legislation). Removal of friable asbestos material must only be undertaken by contractor that holds a current friable asbestos removal licence.

 

31.     On demolition sites involving the removal of asbestos, a  professionally manufactured sign must be clearly displayed in a prominent visible position at the front of the site, containing the words ‘DANGER ASBESTOS REMOVAL IN PROGRESS” and include details of the licensed contractor. The sign shall measure not less than 400mm x 300mm and the sign is to be installed prior to demolition work commencing and is to remain in place until such time as all asbestos has been safely removed from the site.

 

32.     Asbestos waste must be stored, transported and disposed of in compliance with the Protection of the Environment Operations Act 1997 and the Protection of the Environment Operations (Waste) Regulation 1996.

Asbestos waste must be disposed of at an approved waste disposal depot (refer to the DEC or Waste Service NSW for details of sites). Copies of all receipts detailing method and location of disposal must be maintained on site and be provided to Council officers upon request, as evidence of correct disposal.

 

33.     A Certificate or Statement, prepared by a suitably qualified person (i.e. an occupational hygienist, licensed asbestos removal contractor, building consultant, architect or experienced licensed building contractor), must be provided to Council upon completion of the works (prior to an Occupation Certificate being issued), which confirms that the relevant requirements contained in the Asbestos Survey and conditions of consent, in relation to the safe removal and disposal of asbestos, have been satisfied.

 

34.     All excavations and backfilling associated with the erection or demolition of a building must be executed safely in accordance with appropriate professional standards and excavations are to be properly guarded and supported to prevent them from being dangerous to life, property or buildings.

 

Retaining walls, shoring or piling must be provided to support land which is excavated in association with the erection or demolition of a building, to prevent the movement of soil and to support the adjacent land and buildings, if the soil conditions require it.  Adequate provisions are also to be made for drainage.

 

Retaining walls, shoring, or piling must be designed and installed in accordance with appropriate professional standards and the relevant requirements of the Building Code of Australia and Australian Standards.  Details of proposed retaining walls, shoring or piling are to be submitted to and approved by the Principal Certifying Authority for the development prior to commencing such excavations or works.

 

35.     Except with the written approval of Council’s Manager of Health, Building & Regulatory Services, all building, demolition and associated site works (including site deliveries) must only be carried out between the hours of 7.00am to 5.00pm on Monday to Friday inclusive and between 8.00am to 5.00pm on Saturdays and all building activities are strictly prohibited on Sundays and Public Holidays.

 

In addition, the use of any rock excavation machinery or any mechanical pile drivers or the like, is restricted to the hours of 8.00am to 5.00pm (maximum) on Monday to Friday only, to minimise the noise levels during construction and loss of amenity to nearby residents.

 

36.     Noise and vibration emissions during the construction of the building and associated site works must not result in damage to nearby premises or result in an unreasonable loss of amenity to nearby residents and the relevant provisions of the Protection of the Environment Operations Act 1997 must be satisfied at all times.

         

37.     Public safety and convenience must be maintained at all times during demolition, excavation and construction works.

 

The roadway, footpath and nature strip must be maintained in a good, safe condition and free from any obstructions, materials, soils or debris at all times.  Any damage caused to the road, footway or nature strip must be repaired immediately, to the satisfaction of Council.

 

A Road Opening Permit must be obtained from the Council and other relevant Authorities prior to excavating or opening-up the road or footway for services or the like.

 

Any part of Council’s nature strip which is damaged as a result of the work must be back-filled, top-soiled and re-turfed with kikuyu turf prior to occupation or finalisation of the development, to Council’s satisfaction.

 

38.     Building materials, sand, soil, waste materials or construction equipment must not be placed upon the footpath, roadway or nature strip at any time and the footpath, nature strip and road must be maintained in a clean condition and free from any obstructions, soil and debris at all times.

 

Bulk bins/waste containers must not be located upon the footpath, roadway or nature strip at any time without the prior written approval of the Council, unless the waste container is located upon the road in accordance with the Roads & Traffic Authority Guidelines and Requirements, and the container is exempt from an approval under Development Control Plan for Exempt & Complying Development and Council’s Local Approvals Policy.  Applications to place a waste container in a public place can be made to Council’s Building Services section.

 

39.     During construction stages, sediment laden stormwater run-off shall be controlled using the sediment control measures outlined in the manual for Managing Urban Stormwater – Soils and Construction, published by the NSW Department of Housing

 

Stockpiles of soil, sand, aggregate or other materials must not be located on any footpath, roadway, nature strip, drainage line or any public place and the stockpiles must be protected with adequate sediment control measures.

 

Building operations such as brick cutting, washing tools or equipment and mixing mortar are not permitted on public footpaths, roadways, nature strips, in any public place or any location which may lead to the discharge of materials into the stormwater drainage system.

 

A warning sign for soil and water management must be displayed in a prominent position on the building site, visible to both the public and site workers.  The sign must be displayed throughout the construction period.  Copies of a suitable warning sign are available at Council’s Customer Service Centre for a nominal fee.

 

40.     Public safety must be maintained at all times and public access to the site and building works, materials and equipment on the site is to be restricted, when work is not in progress or the site is unoccupied.

 

A temporary safety fence is to be provided to protect the public, located to the perimeter of the site (unless the site is separated from the adjoining land by an existing structurally adequate fence, having a minimum height of 1.5 metres).  Temporary fences are to have a minimum height of 1.8 metres and be constructed of cyclone wire fencing, with geotextile fabric attached to the inside of the fence to provide dust control, or other material approved by Council.

 

Temporary site fences are to be structurally adequate, safe and be constructed in a professional manner and the use of poor quality materials or steel reinforcement mesh as fencing is not permissible.

 

The public safety provisions and temporary fences must be in place prior to the commencement of any demolition, excavation or building works and be maintained throughout construction.

 

If it is proposed to locate any site fencing, hoardings or amenities upon a footpath or public place, the written consent from Council’s Building Services section must be obtained beforehand and detailed plans are to be submitted to Council for consideration, together with payment of the weekly charge in accordance with Council’s adopted fees and charges.

 

41.     A local approval application must be submitted to and be approved by Council's Building Services section prior to commencing any of the following activities on a footpath, road, nature strip or in any public place:-

 

·                     Install or erect any site fencing, hoardings or site structures

·                     Operate a crane or hoist goods or materials over a footpath or road

·                     Placement of a waste skip (greater than 3m in length) or any container or other article.

 

The following conditions have been applied to ensure that noise emissions from the development satisfy legislative requirements and maintain reasonable levels of amenity to the area:

 

42.     The installation of rainwater tanks shall comply with the following noise control requirements:-

 

a)     The operation of all plant and equipment shall not give rise to an ‘offensive noise’ as defined in the Protection of the Environment Operations Act 1997 and Regulations.

 

In this regard, the operation of the plant and equipment shall not give rise to an LAeq, 15 min sound pressure level at any affected premises that exceeds the background LA90, 15 min noise level, measured in the absence of the noise source/s under consideration by more than 5dB(A) in accordance with relevant NSW Department of Environment & Conservation Noise Control Guidelines.

 

b)     Plant and equipment associated with rainwater tank(s) are to be enclosed in a sound absorbing enclosure or installed within a building, to minimise noise emissions and possible nuisance to nearby residents.

 

c)     The operation of plant and equipment associated with the rainwater tank(s)  are to be restricted to the following hours if the noise emitted can be heard within a habitable room in any other residential premises:

 

·       before 8.00am or after 8.00pm on weekends or public holiday; or

·       before 7.00am or after 8.00pm on weekdays.

 

The following conditions are applied to satisfy the relevant pollution control criteria and to maintain reasonable levels of health, safety and amenity to the locality:

 

43.     The use and operation of the premises shall not give rise to an environmental health or public nuisance.

 

44.     There are to be no emissions or discharges from the premises which give rise to a public nuisance or result in an offence under the Protection of the Environment Operations Act 1997 and Regulations.

 

The following conditions are applied to provide adequate provisions for access, transport and infrastructure:

 

45.     The applicant must meet the full cost for Council or a Council approved contractor to repair/replace any damaged sections of Council's footpath, kerb & gutter, nature strip etc which are due to building works being carried out at the above site. This includes the removal of cement slurry from Council's footpath and roadway.

 

The following conditions are applied to provide adequate consideration for service authority assets:

 

46.     The applicant must meet the full cost for telecommunication companies, gas providers, Energy Australia and Sydney Water to adjust/repair/relocate their services as required.  The applicant must make the necessary arrangements with the service authority.

 

The following conditions are applied to provide adequate provisions for drainage and associated infrastructure:

 

47.     Detailed drainage plans shall be submitted to and approved by the certifying authority prior to the issue of a construction certificate. The drainage plans shall demonstrate compliance with the conditions of this development approval.

 

48.     Stormwater runoff from the site shall be discharged either:

 

a.       To the kerb and gutter along the site frontage by gravity (without the use of a charged system); OR

 

b.       Through a private drainage easement(s) to Council’s kerb and gutter (or underground drainage system); OR

 

c.       To a suitably sized infiltration area. As a guide the infiltration area shall be sized based on a minimum requirement of 1 m2 of infiltration area (together with 1 m3 of storage volume) for every 20 m2 of roof/impervious area on the site. Infiltration systems shall be located a minimum 2.1 metres from any side or rear boundary and 3 metres from adjoining structures.

 

Prior to the use of infiltration in rear draining lots (where there is no formal overland escape route to Council’s kerb and gutter/street drainage system),  a geotechnical investigation will be required to determine whether the ground is suitable for infiltration. Should rock and/or a water table be encountered within two metres of the proposed base of the infiltration pit, or the ground conditions comprise low permeability soils such as clay, infiltration may not be appropriate.

 

NOTE: Should the applicant be unable to obtain a private drainage easement over properties to the rear of the development site (to facilitate stormwater discharge in accordance with option b)); and ground conditions preclude the use of infiltration (Option c), consideration may be given to the use of a charged system or a pump out system to drain that portion of the site that cannot be drained by gravity to the kerb and gutter at the front of the property.

 

49.     Should a charged system be required to drain any portion of the site, the charged system must be designed with suitable clear-outs/inspection points at pipe bends and junctions.

 

50.     Should a pump system be required to drain any portion of the site the system must be designed with a minimum of two pumps being installed, connected in parallel (with each pump capable of discharging at the required discharge rate) and connected to a control board so that each pump will operate alternatively. The pump wet well shall be sized for the 1 in 100 year, 2 hour storm assuming both pumps are not working.

 

The pump system must also be designed and installed strictly in accordance with Randwick City Council's Stormwater Code.

 

51.     All pump out water must pass through a stilling pit prior to being discharged by gravity to the kerb and gutter.

 

The following conditions are applied to provide adequate provisions for landscaping and to maintain reasonable levels of environmental amenity:

 

52.     That part of the naturestrip upon Council's footway which is damaged during the construction of the proposed works shall be excavated to a depth of 150mm, backfilled with topsoil equivalent with 'Organic Garden Mix' as supplied by Australian Native Landscapes, and re-turfed with Kikuyu turf or similar. Such works shall be completed at the applicant’s expense prior to the issue of a final Occupation Certificate.

 

53.     Permission is granted for the selective pruning of overhanging branches from the Citrus tree located on the adjoining property (No 10 Nolan Ave). This approval does not imply any right of entry onto a neighbouring property nor does it allow pruning beyond a common boundary. However, where such measures are desirable in the best interests of correct pruning procedures, it shall be necessary for the applicant to negotiate with the tree owner. All pruning must be undertaken by a qualified Arborist, with suitable qualifications in Arboriculture and to Australian Standard AS 4373-1996 'Pruning of Amenity Trees.’

 

ADVISORY MATTERS:

 

A1      Building or excavations works must not be commenced until a construction certificate has been obtained from Council's Building Certification Services or an Accredited Certifier and either Council's Building Certification Services or an Accredited Certifier has been appointed as the Principal Certifying Authority (PCA) for this development.

 

Failure to obtain a Construction Certificate and appoint a PCA before commencing works is an offence, which renders the responsible person liable to a maximum penalty of $1.1 million under the Environmental Planning & Assessment Act 1979.

 

A2      The applicant is advised that the Construction Certificate plans and specification must comply with the provisions of the Building Code of Australia (BCA) and the construction certificate must not be inconsistent with the development consent.

 

In this regard, the development consent plans do not detail compliance with the deemed-to-satisfy provisions of the BCA.

 

Details of compliance with the relevant provisions of the Building Code of Australia and conditions of development consent are to be provided in the plans and specifications for the construction certificate.

 

You are therefore advised to ensure that the development is not inconsistent with Council's consent and to consult with Council’s Building Certification Services or an accredited certifier prior to submitting your construction certificate application to enable these matters to be addressed accordingly.

 

A3      The applicant is to advise Council in writing and/or photographs of any signs of existing damage to the Council roadway, footway, or verge prior to the commencement of any building/demolition works.

 

MOTION: (Matson/Woodsmith) that this application be deferred in order to allow the applicant to submit amended plans which show a 400mm reduction in height of the new addition to the rear of the property and to allow councillors to assess the impact of the proposed kitchen door facing number 10 Nolan Avenue. LOST.

 

MOTION: (Andrews/Tracey) CARRIED – SEE RESOLUTION. Plus remove the masonry wall adjoining the deck on western side

 

6.4      DEVELOPMENT APPLICATION REPORT - 10-16A BREAM STREET, COOGEE.  (DA/185/2007 & PROP039825 & 842)

 

H87        RESOLUTION:  (Seng/Matson) that Council as the responsible authority defer its development consent for Development Application No DA/185/2007 at 10-16A Bream Street, Coogee until the next Oordinary Council meeting to allow residents to continue discussions with the applicant on several issues, including privacy and noise.

 

MOTION: (Seng/Matson) CARRIED – SEE RESOLUTION.

 

7.         CONFIDENTIAL ITEMS.

 

Nil.

 

8.         NOTICES OF RESCISSION MOTIONS.

 

Nil.

 

The meeting closed at 8.34 p.m.

 

 

 

 

……………………………………….

CHAIRPERSON